Dimensions Guide
WATERHILL™
ExactTemp® 3/4" Thermostatic
Shower Trim
Models: TS3110 series-valve trim only
TS3112 series-shower trim only
Valves: S3371 - thermostatic
S3600 - volume control
5-1/4"
(133.4mm)
WALL OPENING
2-1/4"
(57mm)
WALL OPENING
8" (203mm)
6"(152mm) MIN
2-11/16"
(68.4mm)
8-7/16"
(214.3mm)
10"
(254mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes 10" Rainshower showerhead, arm and flange
OPERATION
• Flow lever operates counterclockwise through a 90 degree arc with
off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in
clockwise direction
• Temperature lever operates through a 340 degree arc with maximum
cold at full clockwise rotation and maximum hot at full counterclockwise
rotation
• Safety stop preset temperature at 105˚F ( 41degrees C)
• Safety stop override allows maximum temperature at 120˚F (49˚C)
• Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C)
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 130156 thermostatic cartridge design with non metallic/nonferrous
materials
• 130157 volume ceramic disc cartridge design
STANDARDS
• Third party certified to meet CSA B125.1, ASME A112.18.1, and all
applicable requirements referenced therein including ASSE1016
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installation
SHOWER ONLY APPLICATION
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Spec i fi ca tions
TS3116sp: Rev. 3/11