Dimensions Guide

ManualsBrandsMOEN ManualsBathWaterhill 8 in. Widespread 2-Handle High-Arc Bathroom Faucet Trim Kit in Oil Rubbed Bronze (Valve Not Included)

1-1/4” (32mm) MAX.

DECK THICKNESS

1-1/4” (32mm) MAX.

DECK THICKNESS

5-25/32"

(147mm)

ESCUTCHEON DIA.

2-13/32"

(61mm)

ESCUTCHEON DIA.

2-23/32"

(69mm)

3-7/32"

(82mm)

3-7/8"

(98mm)

5-3/4"

(146mm)

8" (203mm) - 16" (406mm)

Centers

2-15/16"

(75mm)

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections will accept standard ball nose connection

for 3/8” tubing

• Includes optional hot and cold temperature indicators

• Hydrolock™ quick connect installation

• Includes metal pop-up waste assembly

• For use with 9000 valve

• Designed to be installed through 3, 1-1/8” dia. holes

OPERATION

• Lever style handles

• Features a pivoting spout with self-centering feature - total rotation of 94˚

• Maximum handle rotation angle is 90˚ to full on for either handle

• Rotate hot side handle counterclockwise to open and clockwise to close

• Rotate cold side handle clockwise to open and counterclockwise to close

FLOW

• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made

before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)

CARTRIDGE

• 1234™ Duralast™ cartridge

• Nonmetallic, nonferrous and stainless steel material

STANDARDS

• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,

ICC A117.1 and all applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

WATERHILL™

Two-Handle Widespread

Lavatory Faucet Trim

Models: TS418 series

Valve: 9000

NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT

#175709. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.

NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.

VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.

NOTE: FOR DECK THICKNESS 1-3/8” - 3”, USE SERVICE KIT #115001. VALVES INSTALL THROUGH 1-1/4” DIA. HOLE

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

S p e c i f i c a t i o n s

Rev. 11/15

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • • • • • Metal construction with various finishes identified by suffix 1/2" IPS connections will accept standard ball nose connection for 3/8” tubing Includes optional hot and cold temperature indicators Hydrolock™ quick connect installation Includes metal pop-up waste assembly For use with 9000 valve Designed to be installed through 3, 1-1/8” dia.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • • • • • Metal construction with various finishes identified by suffix 1/2" IPS connections will accept standard ball nose connection for 3/8” tubing Includes optional hot and cold temperature indicators Hydrolock™ quick connect installation Includes metal pop-up waste assembly For use with 9000 valve Designed to be installed through 3, 1-1/8” dia.