Specification
1-1/4” (32mm) MAX.
DECK THICKNESS
1-1/4” (32mm) MAX.
DECK THICKNESS
5-25/32"
(147mm)
ESCUTCHEON DIA.
2-13/32"
(61mm)
ESCUTCHEON DIA.
2-23/32"
(69mm)
3-7/32"
(82mm)
3-7/8"
(98mm)
5-3/4"
(146mm)
8" (203mm) - 16" (406mm)
Centers
2-15/16"
(75mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections will accept standard ball nose connection
for 3/8” tubing
• Includes optional hot and cold temperature indicators
• Hydrolock™ quick connect installation
• Includes metal pop-up waste assembly
• For use with 9000 valve
• Designed to be installed through 3, 1-1/8” dia. holes
OPERATION
• Lever style handles
• Features a pivoting spout with self-centering feature - total rotation of 94˚
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side handle counterclockwise to open and clockwise to close
• Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
• 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
WATERHILL™
Two-Handle Widespread
Lavatory Faucet Trim
Models: TS418 series
Valve: 9000
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8” MIN. DIA. HOLE.
NOTE: FOR DECK THICKNESS 1-3/8” - 3”, USE SERVICE KIT #115001. VALVES INSTALL THROUGH 1-1/4” DIA. HOLE
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
Rev. 6/13