Dimensions Guide

DESCRIPTION
Metal construction with various finishes identified by suffix
Designed to be installed through 2, 1-1/4" and 1, 1" min. dia. holes
8" on center
1/2" copper connections
Adaptable for non-8" centers
OPERATION
Maximum handle rotation angle is 90˚ to full on for either handle
Rotate hot side counterclockwise to open and clockwise to close
Rotate cold side clockwise to open and counterclockwise to close
FLOW
Water usage is limited to these maximum flow rates as indicated
by the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
1224 cartridge design nonmetallic/nonferrous and stainless
steel material
STANDARDS
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
Certified to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water
efficiency regulations
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
WEYMOUTH™
Two-Handle Wall Mount Faucet
3"
(76mm)
2-1/2 "
(64mm)
8” (203mm) MIN.
2" Dia.
(51mm)
4"
(101mm)
8-3/8"
(213mm)
7.84"
(199mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-1/2
(38mm)"
3” (76mm) MIN.
Model: TS42106 series (Lever Handle)
TS42112 series (Cross Handle)
Valve: 9700
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 1/16

Summary of content (2 pages)