Dimensions Guide

DESCRIPTION
Metal construction with various finishes identified by suffix
Designed to be installed through 2, 1-1/4" and 1, 1" min. dia holes
8" on center
Adaptable for non-8" centers
Hot and cold indicators available
OPERATION
Maximum handle rotation angle is 90˚ to full on for either handle
Rotate hot side counterclockwise to open and clockwise to close
Rotate cold side clockwise to open and counterclockwise to close
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
1224 cartridge design
Nonmetallic/nonferrous and stainless steel material
STANDARDS
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
ARRIS™
Two-Handle Wall Mount Faucet
Models: TS43003 series
Valve: 9700
2-11/16"
(68mm)
2-1/4 " Spout Base
(57mm)
2" Handle Base
(51mm)
3-3/32"
(79mm)
8"
(203mm)
3" (76mm) MIN.
MAX WALL THICKNESS
1-3/4” (45mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
4/13
M•pact™ System

Summary of content (1 pages)