Specification Sheet

DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4” and 1, 1” min. dia. holes
8” on center
• 1/2” copper connections
• Adaptable for non-8” centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Water usage is limited to these maximum flow rates as indicated
by the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and stainless
steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
COLINET™
Two-Handle Wall Mount Faucet
3-1/4"
(76mm)
2-1/4 "
(51mm)
8” (203mm) MIN.
2" Dia.
(51mm)
4-1/2"
(114mm)
9-1/8"
(229mm)
8-1/2"
(203mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-5/8
(26mm)"
1-1/2" (38mm) MIN.
Models: TS44104 series (Lever Handle)
TS44105 series (Cross Handle)
Valve: 9700
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
3/20
M•pact System