Dimensions Guide
FAUCET DESCRIPTION
• Duralock™ quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Includes hot and cold temperature indicators
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and
all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
90 DEGREE™
Two Handle Widespread
Lavatory Faucet Trim
Model: TS6720 Series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
2-5/8"
(67mm)
4-3/8"
(111mm)
1-1/4"
(32mm)
max deck thickness
14-1/4"
(362mm)
3-1/8"
(79mm)
3-7/8"
(99mm)
4-5/8"
(117mm)
4-1/16"
(106mm)
Lift
Rod
Specifications
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
Rev. 1/16
There is more than 1 version of this model.
Page down to identify the version you have.