Specification Sheet

Rev. 07/21
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
• Includes red and blue temperature markings
OPERATION
• Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock
and maximum hot at the 9 o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge temperature to ± 3°
FLOW
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
CARTRIDGE
• 1212 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein
• EP suffix models are third party certified to WaterSense®
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CIA
™
Single-Handle MCore™ 2-Series Tub/Shower Trim Kit
NOTE:
Valves: U140 series, U130 series
MODELS:
UT2261 series - valve trim only
UT2262EP series - shower trim only
UT2263EP series - tub/shower trim
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
6-1/2”
(165mm)
7”
(178mm)
8-7/8”
(134mm)
6-1/2”
(165mm)
3-1/2”
(89mm)
7-1/4”
(184mm)
Finished Wall Line
Face of stud
6’-6”
(1981mm)
2-1/2” Max
(63mm)
45” (1143mm)/
48” (1219mm-Shower
32” (813mm)-Tub or
Tub Shower
Floor
C
L
3-3/8”
(86mm)
3-1/2”
(89mm)