Spec Sheet

Rev. 04/21
DESCRIPTION
• Metal construction with varoius finishes idenditfied by suffix
• Shower Only kits include showerhead, arm, flange
• Tub/shower kits include showerhead, arm, flange and diverter spout
OPERATION
• Handle operates counterclockwise through a 150˚ arc with off at 6 o’clock
and maximum hot at the 1 o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to +/- 3.6˚F (+/- 2˚C)
FLOW
• EP suffix models contain a showerhead limited to 1.75 gpm (6.6 L/min)
• NH suffix models contain no showerhead
CARTRIDGE
• 1212 Ceramic Disk Temperature Control Cartridge
• Non-metallic/non-ferrous and plastic material
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125-1, ASSE
1016 and all applicable requirements reference therein
• Moen’s M-CORE™ pressure balance system is capable of
meeting the pressure and temperature variation requirements
of ASSE 1016 when tested as low as 1.3 gpm (4.9 L/min)
• EP suffix models are third party certified to EPA WaterSense®
• ADA compliant for lever handle
WARRANTY
• Lifetime limited warranty against material or manufacturing defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Genta
™
LX M-CORE
™
2-Series
Single-Handle Tub/Shower Trim
Valves: U130 Series and U140 Series
MODELS:
UT2473EP/NH Series - Tub/Shower Trim
UT2472EP/NH Series - Shower Trim
UT2471 Series - Valve Trim
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
4-1/2”
(114mm)
3”
(76mm)
7”
(178mm)
6-1/4”
(159mm)
2-1/2”
(64mm)
7-1/2”
(191mm)
FINISHED WALL
2-1/2”
(64mm)
1” (25mm) MAX.
wall thickness
6” - 11”
(152mm - 279mm)
3”
(76mm)