Spec Sheet

Rev. 04/21
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Shower Only kits include showerhead, arm, flange
• Tub/Shower kits include showerhead, arm, flange and diverter spout
OPERATION
• Handle operates counterclockwise through 150˚ arc with off at 6 o’clock
and maximum hot at the 1 o’clock position. Shut off in clockwise direction.
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to +/-3.6˚ F (+/-2˚ C)
FLOW
• EP suffix models contain a showerhead limited to 1.75 gpm (6.6 L/min)
CARTRIDGE
• 1212 Ceramic Disk Temperature Control Cartridge
• Non-metallic/non-ferrous and plastic material
• Accommodates back to back installation
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125-
1, ASSE 1016/ASME A112.1016/CSA B.125.16 and all
applicable requirements reference therein
• Moen’s M-CORE™ pressure balance system is capable of meeting the
pressure and temperature variation requirements of ASSE 1016/ASME
A112.1016/CSA B125.16 when tested as low as 1.3 gpm (4.9 L/min)
• EP suffix models are third party certified to EPA WaterSense®
• ADA Compliant for lever handle
WARRANTY
• Lifetime limited warranty against material or manufacturing defects to
the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Weymouth
™
M-CORE
™
2-Series
Single-Handle Tub/Shower Trim
Valves: U130 Series and U140 Series
MODELS:
UTS232104EP Series - Tub/Shower Trim
UTS232102EP Series - Shower Trim
UTS23210 Series - Valve Trim
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
7-1/2”
(191mm)
3-1/4”
(82mm)
19”
(483mm)
FINISHED WALL
7-1/4”
(184mm)
9-1/8”
(232mm)
2-1/4”
(57mm)
3-1/4”
(82mm)
3-1/2”
(89mm)
6” - 11”
(152mm - 279mm)
1” (25mm) MAX.
wall thickness