Specs Sheet

Wall Mounted Hair Dryer Holder is
constructed of zinc post and stainless
steel ring.
 YB5170BN – Hair Dryer Holder
Brushed Nickel Finish
 YB5170CH – Hair Dryer Holder
Chrome Finish
 YB5170ORB – Hair Dryer
Holder
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN D R I VE  N ORTH OLMSTED, OH 44070
C ORPOR ATE H EAD QU ARTER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: (440) 962 -2000  F AX: [phone]
C U STOMER SER VIC E (U SA): 800 -882-0116  FAX: [phone]
W W W. MOEN . C OM
Copyright Creative Specialties International Literature #BA1622
1. Remove the mounting bracket from the body by loosening the
setscrew.
2. Position the assembled unit on the wall where desired.
3. Lightly mark the outline of the base.
4. Center a mounting bracket within the base outline with “UP” facing
you.
5. Attach the mounting bracket to the wall, using the wall anchors
provided.
6. Mount the base on the corresponding mounting bracket. Check and
make sure that the base set screw hole is facing down. Assemble a
set screw to the base. Use the allen wrench included in the hardware
kit to tighten the set screw and secure the assembly to the mounting
bracket.
Stock Number:___________________Hair Dryer Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Wall Mounted Hair Dryer Holder
YB5170
Voss™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.