Specification

ManualsBrandsMOEN Manuals4 inch Centerset Sink FaucetsAdler 4 in. Centerset 2-Handle Low-Arc Bathroom Faucet in Chrome

MOEN®

Two-Handle Lavatory Faucet

Models: 84403, CA84403

84402, Discontinued

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

S p e c i f i c a t i o n s

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 9/15

DESCRIPTION

• Chrome plated metal construction

• 1/2" IPS connections

• Includes metal/polypropylene pop-up type waste assembly for model

84403; less waste assembly for model 84402

OPERATION

• Lever handles

• Handles rotate toward spout to open

FLOW

• Water usage is limited to these maximum flow rates as indicated by the

corresponding product markings

1.2 gpm max (4.5L/min) at 60 psi

1.5 gpm max (5.7L/min) at 60 psi

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material

STANDARDS

• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1

and all applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water

efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

LIFT

ROD

COLD

1/2" NPT

INLET

HOT

1/2" NPT

INLET

MOUNTING

NUT/WASHER

3/4"(19mm)

MAX. DECK

THICKNESS

4-5/8"

(118mm)

2-1/4"

(58mm)

3-13/16"

(98mm)

2-7/8"

(74mm)

NOTE: This faucet is designed to be

in stalled thru 3 holes, 1" min. dia.

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • Chrome plated metal construction 1/2" IPS connections Includes metal/polypropylene pop-up type waste assembly for model 84403; less waste assembly for model 84402 OPERATION • • Lever handles Handles rotate toward spout to open FLOW • Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • Chrome plated metal construction 1/2" IPS connections Includes metal/polypropylene pop-up type waste assembly for model 84403; less waste assembly for model 84402 OPERATION • • Lever handles Handles rotate toward spout to open FLOW • Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi CARTRIDGE • • 1224 cartridge design Nonmetallic and stainless steel material STANDARDS • • • Third party certified to WaterSense,® ASME A112.18.1/CSA B125.