Dimensions Guide

ManualsBrandsMOEN ManualsBathAdler 4 in. Centerset 2-Handle Low-Arc Bathroom Faucet in Chrome

S p e c i f i c a t i o n s

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

SPACER

PROVIDED –

DISCARD IF

MOUNTING

SURFACE IS

MORE THAN

3/4" THICK

1-3/4"

(45mm)

MAX.

(51mm)

1/2" IPS

ADAPTER

DECK PLATE

TOP OF

MOUNTING

SURFACE

6-1/8" (156mm)

ESCUTCHEON WIDTH

(51mm)

Lift

Rod

(51mm)

ESC.

WIDTH

4-3/8"

(111mm)

5-5/8"

(143mm)

(101mm)

5-1/8"

(130mm)

DESCRIPTION

• Metal construction with chrome plated finish

• 1/2" IPS connections

• Includes optional knob handle assembly

OPERATION

• Pivot action lever style handle

• Temperature controlled through 100˚ degree arc of handle travel

FLOW

• Water usage is limited to these maximum flow rates as indicated by the

corresponding product markings

1.2 gpm max (4.5L/min) at 60 psi

1.5 gpm max (5.7L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge

• Nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1

and all applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water efficiency

regulations

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED

THRU 3-1" DIA. HOLES, 2" ON CENTER

Single-Handle Lavatory Faucet

with Optional Knob

Handle Assembly

Model: 84503

Rev. 7/15

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • Metal construction with chrome plated finish 1/2" IPS connections Includes optional knob handle assembly OPERATION • • Pivot action lever style handle Temperature controlled through 100˚ degree arc of handle travel FLOW • Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.5L/min) at 60 psi ° 1.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • Metal construction with chrome plated finish 1/2" IPS connections Includes optional knob handle assembly OPERATION • • Pivot action lever style handle Temperature controlled through 100˚ degree arc of handle travel FLOW • Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi CARTRIDGE • • 1255™ Duralast™ cartridge Nonmetallic/nonferrous and stainless steel material STANDARDS • • • Third party certified to WaterSense®, ASME A112.18.1/CSA B125.