Specification

DESCRIPTION
Metal construction with various finishes identified by suffix
1/2" IPS connections
Includes metal pop-up waste assembly
OPERATION
Lever style handles
Maximum handle(s) rotation angle is 90˚ to full on
Rotate hot side counterclockwise to open (clockwise to close)
Rotate cold side clockwise to open (counterclockwise to close)
FLOW
Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
1224 cartridge design
Nonmetallic and stainless steel material
STANDARDS
Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
Certified to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water
efficiency regulations
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
Ashville™
4" Lavatory Faucet
with Metal Waste Assembly
Models: WS84777 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
4"
(102mm)
3"
(76mm)
3"
(76mm)
5"
(127mm)
2-5/8"
(67mm)
3/8" min.
(10mm)
1-1/2" max.
(38mm)
4 -27/32"
(123mm)
7"
(178mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
1/16

Summary of content (1 pages)