Technical Specifications

Specifications
DESCRIPTION
• Metal construction with nish identied by sux
• 1/2" IPS connections for exible hoses only; not for use with rigid or semi-rigid
supply risers (3/8" Copper or Pex) with coupling nuts
• Installation through 3 holes, 1" min. diameter, and 4" on center
• Includes non-metal pushdown waste assembly
OPERATION
• Lever handles
• Maximum handle rotation angle is 90° to full on
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to the maximum ow rates as indicated by the corresponding
product markings
º
1.2 gpm max (4.5 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certied at WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable
requirements referenced therein including NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water eciency
regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and nish defects to the original
homeowner
• 10 year warranty when used in a multifamily installation
• 5 year warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
OPTIONS (See Illustrated Parts page)
• Thin and thick deck mounting hardware kits available
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 10/18
TIFFIN
™
Two-Handle 4" Centerset Lavatory Faucet
Models: WS84876 series
4-1/8"
(105mm)
6-5/8"
(168mm)
5-5/8"
(143mm)
2-15/16"
(75mm)
1/4" (6mm)
Min. Deck Thickness
1-1/16" (27mm)
Max. Deck Thickness
4"
(102mm)
on center
6-7/16"
(164mm)
2-7/8"
(73mm)
4-1/8"
(105mm)
5"
(127mm)
There is more than one version of this model.
Page down to identify the version you have.