Full Product Manual
Y2690CH – Glass Shelf
Chrome Finish
Y2690BN – Glass Shelf
Brushed Nickel Finish
Y2690BRB – Glass Shelf
Mediterranean Bronze Finish
25300 AL MO E N D R I VE NO RTH O L M S T E D , O H 4 4 0 7 0
CO R P O RAT E HE A D Q U A RT ER S : ( 8 00 ) 3 2 1 -88 0 9 FA X: (800) 8 4 8 - 6 6 3 6
IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00 F A X: ( 4 4 0 ) 962 -2726
CU S T O M ER S ER V ICE ( US A): 800 -882 - 0 1 1 6 FA X: ( 88 8 ) 3 7 9 - 2720
W WW . MO E N .C O M
Copyright Creative Specialties International Literature # BA1218
Directions below are for installation into drywall. If installing product into a
stud, use the wood screws and washers provided only.
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill two 5/16” holes as indicated on the template.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the w all.
6. Lightly tap anchors until f lush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to activate
anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew.
9. Place the mounting plate on the w all over the installed w all anchors with “UP”
facing you.
10. Insert screws through the mounting plate into the anchors. Tighten the screws.
11. Unscrew the top accent cap from both assemblies. Reassemble with glass shelf
between both washers and finish by screwing top accent cap back on.
12. Place assembly over the mounting posts with setscrews facing down. Tighten
both setscrews.
Glass Shelf is constructed of zinc.
Cleaning Instructions:
Stock Number: Y2690 : Glass Shelf
By Moen
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
Y26
BANBURY
®
Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.