Installation Guide

 Y3186BN – Towel Ring
Brushed Nickel Finish
 Y3186BRB – Towel Ring
Mediterranean Bronze Finish
 Y3186CH – Towel Ring
Chrome Finish
25300 AL MOEN DR I VE  N OR TH OLMSTED , OH 44070
C ORPOR ATE H EADQU AR TER S: (800) 321 -8809  F AX: [phone]
I NTER N ATION AL: [phone]  F AX: (440) 962 -2726
C USTOMER SER VIC E (U SA): 800-882-0116  F AX: [phone]
W WW . MOEN. C OM
Copyright Creative Specialties International Literature # BA1536
Towel Ring post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Chrome, Brushed
Nickel or Mediterranean Bronze.
Towel Ring is aluminum for Chrome
and Brushed Nickel finishes and
Stainless Steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Remove mounting plate from hardw are pack.
2. Position the mounting plate on the w all at desired location w ith “UP”
facing you. Mark hole locations.
3. Drill 2 holes as marked using 5/16” drill bit.
4. Fold ends of the plastic toggle anchor together and insert into each hole
in the w all.
5. Lightly tap anchors until flush w ith the w all.
6. One at a time, insert plastic pin into each anchor and lightly tap to activate
anchor. Remove pin and repeat on other anchor.
7. Place the mounting plate on the w all over the installed w all anchors w ith
“UP” facing you.
8. Tighten screw s.
9. Place decorative product over the mounting plate w ith setscrew facing
dow n and tighten setscrew .
Stock Number:________________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
Y3186
Lindale™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.