Specification Sheet

Arlys™ Technical Specication
Double Towel Bar Y5722
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
Y5722CH – Towel Shelf
Chrome Finish
Y5722BN – Towel Shelf
Brushed Nickel Finish
Y5722BL – Towel Shelf
Matte Black Finish
1. Remove the mounting posts from the body by loosening the set screws.
2. Position the mounting posts on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the mounting post, centered in
the large hole. Using a Phillips screwdriver, turn the anchor screw while applying
pressure. Screw will self drill and tap into drywall. Do not over tighten.
4. Place assembly over the mounting post, setscrews facing down.
5. Tighten set screws.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Double Towel Bar is constructed of zinc.
Stock Number: _____________________Double Towel Bar
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2021 Moen Incorporated. Moen is a registered trademark and Aryls is a trademark of Moen
Incorporated. All rights reserved.
24"
610mm
5"
127mm
2-1/8"
55mm