Dimensions Guide

ALIGN
™
Technical Specication
YB0418
18" Towel Bar
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ YB0418CH – 18" Towel Bar
Chrome Finish
☐ YB0418BN – 18" Towel Bar
Brushed Nickel Finish
☐ YB0418BL – 18" Towel Bar
Matte Black Finish
☐ YB0418BG – 18” Towel Bar
Brushed Gold Finish
18" Towel Bar is constructed of zinc.
Stock Number: YB0418 18" Towel Bar
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 1/4" holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for drywall installation).
4. Remove the template from the wall.
5. Lightlytapanchorsuntilushwiththewall.
6. Remove mounting posts from the product assemblies by loosening each
setscrew.
7. One at a time, place each mounting post over anchors (notching facing
downward) and insert screws through post into anchors.
8. Tighten screws.
Topreservethenenishofthisproduct,cleanonlywithasoft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
3.33"
(84.6)
1.34"
(34)
19.34"
(491.2)