Owner Manual

ALIGN
™
Technical Specication
YB0424
24" Towel Bar
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ YB0424CH – 24" Towel Bar
Chrome Finish
☐ YB0424BN – 24" Towel Bar
Brushed Nickel Finish
☐ YB0424BL – 24" Towel Bar
Matte Black Finish
☐ YB0424BG – 24” Towel Bar
Brushed Gold Finish
24" Towel Bar is constructed of zinc.
Stock Number: YB0424 24" Towel Bar
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
3.33"
(84.6)
1.34"
(34)
25.34"
(643.6)
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 1/4" holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for drywall installation).
4. Remove the template from the wall.
5. Lightly tap anchors until ush with the wall.
6. Remove mounting posts from the product assemblies by loosening each
setscrew.
7. One at a time, place each mounting post over anchors (notching facing
downward) and insert screws through post into anchors.
8. Tighten screws.