Dimensions Guide

ALIGN
™
Technical Specication
YB0486
Hand Towel Bar
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ YB0486CH – Hand Towel Bar
Chrome Finish
☐ YB0486BN – Hand Towel Bar
Brushed Nickel Finish
☐ YB0486BL – Hand Towel Bar
Matte Black Finish
☐ YB0486BG – Hand Towel Bar
Brushed Gold Finish
Hand Towel Bar is constructed of zinc.
Stock Number: YB0486 Hand Towel Bar
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 1/4" holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for drywall installation).
4. Remove the template from the wall.
5. Lightly tap anchors until ush with the wall.
6. Remove mounting posts from the product assemblies by loosening each
setscrew.
7. One at a time, place each mounting post over anchors (notching facing
downward) and insert screws through post into anchors.
8. Tighten screws.
3.33"
(84.6)
9.17"
(233)
1.34"
(34)