Specification Sheet

Colinet™ Technical Specication
Cabinet Knob YB0505
Stock Numbers: Dimensions:
Installation Instructions:
Cleaning Instructions:
YB0505CH – Cabinet Knob
Chrome Finish
YB0505BN – Cabinet Knob
Brushed Nickel Finish
YB0505BL –
Cabinet Knob
Matte Black Finish
YB0505BG – Cabinet Knob
Brushed Gold Finish
1. Cabinet knobs will require one 3/16" hole.
2. Using a level, mark the location of the hole.
3. Use a 3/16" drill bit to drill the hole.
4. Insert the screw into the hole.
5. Place the cabinet knob over the screw.
6. Use a Phillips screwdriver to tighen screw.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Materials:
Cabinet Knobs are constructed of zinc.
Stock Number: ___________________ Cabinet Knob
By Moen, Inc.
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2020 Moen Incorporated. Moen is a registered trademark and Colinet is a trademark of
Moen Incorporated. All rights reserved.
13/16"
(21mm)
1"
(25mm)
Dia.