Specs Sheet

25300 AL MO E N D R IVE  NO RTH O L M STE D, OH 44070

CO R P O RATE HE A D Q U ART ER S : (800 ) 3 2 1 -88 0 9  FA X: (800) 8 48 - 6 6 36

IN T E RNAT IO NA L : (440 ) 962 - 2 0 00  FA X: ( 4 4 0 ) 962 -2726

CU ST O MER S ERV ICE (USA): 800 -882 - 0 1 16  FA X: (88 8 ) 379 -2720

WWW .MO EN .C OM

Copyright Creative Specialties International Literature #BA1721

Prime1

Mirror base, arms and ring are

constructed of zinc.

 YB0892BN – Magnifying Mirror

Brushed Nickel Finish

 YB0892CH – Magnifying Mirror

Chrome Finish

Cleaning Instructions:

Stock Number:___________________Magnifying Mirror

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Magnifying Mirror

YB0892

Arris

Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1. Remove the mounting plate from the body by loosening the setscrew.

2. Position the mounting plate on the wall in the desired location and

mark holes.

3. Drill ½” pilot holes in marked locations.

4. Unthread mounting screws from two toggle anchors and thread

through mounting plate holes. CAUTION: Be sure the toggle anchors

are partially threaded onto the screws and positioned so the toggle

collapses when pushed through the predrilled pilot holes. While

holding mounting plate (with screws and toggles installed), push both

toggle anchors through predrilled pilot holes.

5. Tighten both screws until tight.

6. Place mirror assembly over the mounting plate with setscrew down.

Tighten setscrew.