Installation Guide

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Glass
Shelves
are constructed of
zinc except for accent rings and caps
that are brass and shelf that is
tempered glass.
q
Y4790CP
–
Glass
Shelf
Chrome & Polished Brass Finish
Retail Packaging
q YB4790BN – Glass Shelf
Brushed Nickel Finish
Wholesale Packaging
Cleaning Instructions:
1.
Position the assembled unit on the wall where desired.
2. Lightly mark the outline of each base.
3. Remove the mounting brackets from the back of the fixture by loosening the
setscrews with the allen wrench provided.
4. Center the mounting brackets in the outlines. Make sure the arrows are
pointing up and the setscrew holes are facing down.
5. Mark the hole locations.
6. Attach the brackets to the wall. Mounting into wood studs or use of toggle
bolts is recommended whenever possible.
7. Mount the bases on the brackets, followed by the end caps. Tighten the
setscrews to secure the assembly to the brackets.
Stock Number:
________________________Glass Shelf
By Creative Specialties
Materials:
Instal
lation Instructions:
Stock Numbers:
Dimensions:
Glass
Shelf
Y4790
Decorator Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1098