Specification Sheet

Voss™ Technical Specication
Double Robe Hook YB5103
Stock Numbers: Dimensions:
Installation Instructions:
Cleaning Instructions:
YB5103BN – Double Robe Hook
Brushed Nickel Finish
YB5103CH – Double Robe Hook
Chrome Finish
YB5103ORB – Double Robe Hook
Oil Rubbed Bronze Finish
YB5103BG – Double Robe Hook
Brushed Gold
YB5103NL – Double Robe Hook
Polished Nickel
1. Remove the mounting bracket from the body by loosening the setscrew.
2. Position the assembled unit on the wall where desired.
3. Lightly mark the outline of the base.
4. Center a mounting bracket within the base outline with “UP” facing you.
5. Attach the mounting bracket to the wall, using the wall anchors provided.
6. Mount the base on the corresponding mounting bracket. Check and make sure
that the base screw hole is facing down. Assemble a set screw to the base. Use the
allen wrench included in a hardware kit to tighten the set screw and secure the
assembly to the mounting bracket.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Materials:
Robe Hooks are constructed of zinc.
Stock Number: ________________________ Robe Hook
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2019 Moen Incorporated.
1.77"
4.50cm
2.80"
7.11cm
2.50"
6.35cm