Specification Sheet

Voss™ Technical Specication
Towel Ring YB5186
Stock Numbers: Dimensions:
Installation Instructions:
Cleaning Instructions:
YB5186BN – Towel Ring
Brushed Nickel Finish
YB5186CH – Towel Ring
Chrome Finish
YB5186ORB – Towel Ring
Oil Rubbed Bronze Finish
YB5186BG – Towel Ring
Brushed Gold
1. Remove the mounting bracket from the body by loosening the setscrew.
2. Position the assembled unit on the wall where desired.
3. Lightly mark the outline of the base.
4. Center a mounting bracket within the base outline with “UP” facing you.
5. Attach the mounting bracket to the wall, using the wall anchors provided.
6. Mount the base on the corresponding mounting bracket. Check and make
sure that the base set screw hole is facing down. Assemble a set screw to
the base. Use the allen wrench included in the hardware kit to tighten the set
screw and secure the assembly to the mounting bracket.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Materials:
Towel Ring is constructed of zinc.
Stock Number: _____________________ Towel Ring
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2018 Moen Incorporated. Moen is a registered trademark and Voss is a trademark of
Moen Incorporated. All rights reserved.
2.90"
7.37cm
5.78"
14.68c
m
5.60"
14.22cm