Specification

 YB5203CH – Robe Hook

Chrome Finish

 YB5203BN – Robe Hook

Brushed Nickel Finish

25300 AL MO E N D R I V E  NORT H O L MST E D, O H 4 4 0 70

CO R P O RAT E HE A D Q U A RT ERS: ( 8 0 0 ) 32 1 - 8 8 0 9  F A X: (800) 8 48 - 6 6 36

IN T E R NAT IO N A L : ( 4 40) 9 6 2 -2 0 0 0  FA X: ( 440) 9 6 2 -2726

CU S T O M ER S ER V I CE (US A) : 8 0 0 -882 - 0 1 1 6  FA X: ( 888) 3 7 9 - 2720

W WW . MO E N .C O M

Robe Hook is constructed of zinc.

Cleaning Instructions:

Stock Number: YB5203 Robe Hook

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB5203

Wynford

Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1) Position the mounting template on the wall in the desired location.

2) Using a level, align the template and tape it to the wall.

3) Drill two ¼” holes at each mounting post location that corresponds to

your product.

4) Remove the template from the wall.

5) Lightly tap anchors until flush with the wall.

6) Remove mounting post from the product assembly by loosening the

setscrew.

7) Place mounting post over anchors (notch facing downward and insert

screw through post into anchors.

8) Tighten screw

PAGE 1
Wynford® Technical Specification Robe Hook Stock Numbers:  YB5203CH – Robe Hook Chrome Finish  YB5203BN – Robe Hook Brushed Nickel Finish YB5203 Dimensions: Installation Instructions: Materials: Robe Hook is constructed of zinc. 1) Position the mounting template on the wall in the desired location. 2) Using a level, align the template and tape it to the wall. 3) Drill two ¼” holes at each mounting post location that corresponds to your product. 4) Remove the template from the wall.