Installation Manual

Wynford™ Technical Specication
18" Towel Bar YB5218
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
YG5218BN – Towel Bar
Brushed Nickel Finish
YG5218CH – Towel Bar
Chrome Finish
YG5218ORB – Towel Bar
Oil Rubbed Bronze Finish
YG5218NL – Towel Bar
Polished Nickel Finish
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
3. Drill pilot holes in marked location, remove template from wall
4. Attach mounting post to wall using anchors in predrilled pilot holes
5. Tighten all screws.
6. Place each post over the mounting plate with setscrew down. Tighten both
setscrews.
To preserve the ne nish of this product, clean only with a soft damp cloth. Dry
well. Do not use commercial or abrasive cleaners.
18" Double Towel Bar posts are
constructed of zinc. Bar is stainless steel.
Stock Number: ______________________ Towel Bar
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2016 Moen Incorporated. Moen is a registered trademark and Wynford is a trademark of
Moen Incorporated. All rights reserved.
18"
(458mm)
3.72"
(95mm)