Installation Guide

Wynford
™
Technical Specication
YB5222
24" Double Towel Bar
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Installation Instructions:
☐ YB5222CH – Double Towel Bar
Chrome Finish
☐ YB5222BN – Double Towel Bar
Brushed Nickel Finish
☐ YB5222NL – Double Towel Bar
Polished Nickel Finish
☐ YB5222ORB – Double Towel Bar
Oil Rubbed Bronze Finish
24" Double Towel Bar posts are
constructed of zinc. Bar is stainless steel.
Stock Number: Double Towel Bar
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
3. Drill pilot holes in marked location, remove template from wall
4. Attach mounting post to wall using anchors in predrilled pilot holes
5. Tighten all screws.
6. Place each post over the mounting plate with setscrew down.
Tighten both setscrews.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
4-1/4"
109mm
24-1/64"
610mm
6-1/16"
154mm