Specification Sheet

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800- 882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Robe Hook
is constructed of zinc.
q
YB5403CH
–
Robe Hook
Chrome Finish
q YB5403WR – Robe Hook
Wrought Iron Finish
q YB5403BN – Robe Hook
Brushed Nickel Finish
q YB5403AN – Robe Hook
Antique Nickel Finish
q YB5403ORB – Robe Hook
Oil Rubbed Bronze Finish
Cleaning Instructions:
1.
Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location. Large slots
to be right and left. Small holes to be top and bottom.
3. One at a time, place each anchor screw through the mounting post,
centered in the large slot hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap
into drywall. Do not over tighten.
4. Place assembly over the mounting post, setscrew facing down.
5. Tighten setscrew.
Stock Number:
______________________Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
YB5403
Kingsley Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1117