Specification

Beleld™ Accessories Technical Specication
Towel Bar YB6486, YB6418, YB6424
Stock Numbers:
YB6486CH – 9" Towel Bar
Chrome
YB6486BN – 9" Towel Bar
Brushed Nickel
YB6486ORB – 9" Towel Bar
Oil Rubbed Bronze
YB6418CH – 18" Towel Bar
Chrome
YB6418BN – 18" Towel Bar
Brushed Nickel
YB6418ORB – 18" Towel Bar
Oil Rubbed Bronze
YB6424CH – 24" Towel Bar
Chrome
YB6424BN – 24" Towel Bar
Brushed Nickel
YB6424ORB – 24" Towel Bar
Oil Rubbed Bronze
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp
cloth. Dry well. Do not use commercial or abrasive cleaners.
Installation Instructions:
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the set screw.
3. Place each mounting post on the template with notch facing down.
4. Mark the 2 large hole locations of each mounting bracket.
5. Attach each mounting bracket to the wall, using the wall anchors
provided
6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).
7. Tighten all 4 screws. Do not over tighten.
8. Assemble the Towel bar and posts.
9. While assembled, Position each end post with the setscrew down and
place over mounting post. Tighten the set screw at the bottom of each
base.
Materials:
Towel Bar posts are constructed of
zinc. Bar is aluminum.
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©Copyright Moen Incorporated
Stock Number: ________________________ Towel Bar
By Moen Incorporated
Dimensions:
3"
77mm
5.2"
132mm
4.71"
120mm
2.43"
62mm
A
A
YB6486 9" (229mm)
YB6418 18" (457mm)
YB6424 24" (610mm)