Dimensions Guide

Weymouth
®
Technical Specication
Paper Holder YB8408
Stock Numbers: Dimensions:
Cleaning Instructions:
YB8408BN – Paper Holder
Brushed Nickel Finish
YB8408CH – Paper Holder
Chrome Finish
YB8408ORB – Paper Holder
Oil Rubbed Bronze Finish
YB8408NL – Paper Holder
Polished Nickel Finish
YB8408BG – Paper Holder
Brushed Gold Finish
YB8408BL – Paper Holder
Matte Black Finish
Installation Instructions:
1. Position the mounting template on the wall in the desired location. Using a level, align
the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the set screw.
3. Place each mounting post on the template with notch facing down.
4. Mark the 2 large hole locations of each mounting bracket.
5. Attach each mounting bracket to the wall, using the wall anchors provided
6. Mount each base on the corresponding mounting bracket. Check and make sure that
the base set screw hole(s) are facing down. Assemble a set screw to each base. Use
the allen wrench included in hardware kit to tighten each set screw and secure the
assembly to the mounting bracket(s).
7. Tighten all 4 screws. Do not over tighten.
8. Place each post over the mounting plate (set screw down). Pivoting post with bar to be
on left side. Tighten both set screws.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Materials:
Paper Holder is constructed of zinc.
Stock Number: ____________________Paper Holder
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2019 Moen Incorporated. Moen is a registered trademark and Weymouth is a trademark
of Moen Incorporated. All rights reserved.
10.02"
25.45cm
3.83"
9.73cm
1.99"
5.05cm
8.03"
20.39cm
3.29"
8.36cm