Full Product Manual

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
WWW.MOEN . C OM
Copyright Creative Specialties International Literature #BA1453
Towel bar posts are constructed of
zinc. Bar is constructed of aluminum.
 YB9218BN – 18” Towel Bar
Brushed Nickel Finish
 YB9224BN – 24” Towel Bar
Brushed Nickel Finish
 YB9218CH – 18” Towel Bar
Chrome Finish
 YB9224CH – 24” Towel Bar
Chrome Finish
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. Mark the 2 large hole locations of each mounting bracket.
5. Attach each mounting bracket to the wall, using the wall anchors
provided
6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).
7. Tighten all 4 screws. Do not over tighten.
8. Assemble the Towel bar and posts.
9. While assembled, Position each end post with the setscrew down and
place over mounting post. Tighten the setscrew at the bottom of each
base.
10.
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
YB9218 & YB9224
Fina® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.