Specs Sheet
25300  AL  MOEN   D R I VE   N OR TH  OLMSTED ,   OH  44070 
C OR POR ATE H EAD QU AR TER S:  (800)  321 -8809     F AX:   (800)  848-6636 
I N TER N ATI ON AL:  (440)  962-2000   FAX: (440) 962-2726 
C U STOMER   SER VI C E (U SA):  800 -882-0116    F AX:   (888) 379-2720 
W W W . MOEN . C OM 
Copyright Creative Specialties International         Literature #BA1187   
Towel Bars posts are constructed of 
zinc. Bar is aluminum. 
  YB9818CH – 18” Towel Bar 
Chrome Finish 
  YB9824CH – 24” Tow el Bar 
Chrome Finish 
  YB9818BN – 18” Towel Bar 
Brushed Nickel Finish 
  YB9824BN – 24” Tow el Bar 
Brushed Nickel Finish 
  YB9818WR – 18” Tow el Bar 
Wrought Iron Finish 
  YB9824WR – 24” Towel Bar 
Wrought Iron Finish 
  YB9818NL – 18” Towel Bar 
Nickel Finish 
  YB9824NL – 24” Towel Bar 
Nickel Finish 
  YB9818ORB – 18” Tow el Bar 
Oil Rubbed Bronze Finish 
  YB9824ORB – 24” Tow el Bar 
Oil Rubbed Bronze Finish 
Cleaning Instructions: 
1.  Position the mounting template on the wall in the desired location.  Using a 
level, align the template and tape it to the wall. 
2.  Remove each mounting post from the body by loosening the setscrew. 
3.  Place each mounting post on the template with notch facing down. 
4.  One at a time, place each anchor screw through the mounting post, centered 
in the hole. Using a Phillips screwdriver, turn the anchor screw while 
applying pressure.  Screw will self drill and tap into drywall.  
5.  Only insert screw ½ to ¾ into wall. 
6.  After all screws are installed, tear the template away from the wall. 
7.  Tighten all 4 screws.  Do not over tighten.  
8.  Place skirt over each mounting post.Towel Bars 
9.  Assemble the Towel bar and posts.  
10.  While assembled, Position each end post with the setscrew down and place 
over mounting post.  Tighten the setscrew at the bottom of each base. 
Stock Number:______________________Towel  Bar 
By Creative Specialties       
Materials: 
Installation Instructions: 
Stock Numbers: 
Dimensions: 
18” & 24” Towel Bar 
YB9818 & YB9824 
Waterhill® Technical Specification 
To preserve the fine finish of this product, clean only with a soft 
damp cloth.  Dry well. Do not use commercial or abrasive cleaners. 
18" 
24" 
Dim. A 
18.00 
24.00 
Dim. B 
20.40 
26.40 

