User's Guide

Please note that legends in the illustration above, R1…R6, C1..C6, and T1..T6, define the
convention for key positions on Glove80. For example in the default layout Base Layer, LH C2R3
is “R”, and RH T1 is the “Shift” key on the right hand.
If you press and hold the Layer key, Glove80 will momentarily change to the Lower Layer. As
long as you continue to hold down the Layer key, the other keys will have the functions shown
in “Lower Layer” below.
If you double-tap the Layer key, Glove80 will persistently change to the Lower Layer: without
further holding down the Layer key, the other keys will continue to have the functions shown in
“Lower Layer” below. Pressing the Layer key again will return to the Base Layer. This is useful
for the numeric keypad and arrow cluster.
Pae 10 Glove80 User Guide