User's Guide

As you become familiar with Glove80, you may want to customize Glove80’s key layout to
match your typing habits.
Indicators
<This feature is under development. It is currently not available>
When you tap on the Magic key, you will activate the indicators for 10 seconds. The left hand
RGB LEDs will light up to indicate the status of the Glove80, showing:
● Caps lock, scroll lock, and num lock status
● The battery level and status of both left and right halves
● The status of each BT Profiles
● Which key layout layer is currently active
Here is a diagram showing the meaning and position of the indicator RGB LEDs:
Caps-lock, num-lock & scroll-lock
If the respective indicator is red, the lock is enabled.
Key layout layer status
If the respective indicator is purple, the layer is active
Layer 0 is the Base Layer of the key layout.
For the default key layout, Layer 1 is the Lower Layer.
For the default key layout, Layer 2 is the Magic Layer.
Pae 12 Glove80 User Guide