User's Guide

If you are using a customized key layout, the meaning of Layer 1 to Layer 5 will depend on your
definition. If your customized key layout has more than 6 layers, the status of Layer 6 or above
won’t be shown.
Battery indicators
For more details of battery indicators, please refer to the Battery indicators section.
BT and USB indicators
Each BT Profile is represented by a RGB indicator.
The meaning of the colors for a BT Profile Indicator is:
- Red: The BT Profile is current not paired
- Yellow: The BT Profile is paired but the device is currently not connected
- Green: The BT Profile is paired and the device is currently connected.
The meaning of the colors for the USB Indicator is:
- Red: The USB device is currently disconnected
- Green: The USB device is currently connected
One of the BT Indicator and USB Indicator is extra bright. The extra brightness indicates this
particular device is the actual output device to which the key codes will be sent.
Please note that due to behavior of ZMK, the actual output device may not be the same as the
selected output device. ZMK’s output fallback mechanism is explained further in the section
ZMK output fallback mechanism. If the output fallback mechanism is in operation, i.e. actual
output device is not the same as the selected output device, the Output Fallback indicator will
be in red.
Pae 13 Glove80 User Guide