User's Guide

Operating Glove80 wirelessly
Introduction
Glove80 is capable of wirelessly connecting to your computer, your phone or other devices
through Bluetooth Low Energy (BT Low Energy or BLE). Your devices need to support Bluetooth
4.2 or above.
Glove80 supports up to 4 simultaneous BLE devices being paired. Conceptually speaking,
Glove80 has 4 BT Profiles, numbered BT Profile 0 to BT Profile 3.
Each BT Profile can be paired with a different BLE device. If you try to pair with the same BLE
device using two BT Profiles, pairing will fail and may cause strange behavior.
Selecting BT Profile and USB-connected device
On a default key layout, you can select a BT Profile by pressing the Magic Key and the
corresponding key highlighted in blue above.
Once paired and connected, you can quickly switch between BLE devices and the
USB-connected device by selecting the corresponding BT profile or selecting Output to USB.
For example you may pair with a MacBook on BT Profile 0, and an Android phone on BT Profile
1. If you want to type on the MacBook, you can switch to BT Profile 0 by, on the default key
layout, pressing Magic + BkSp. If you then want to switch to the Android phone, you can switch
Pae 14 Glove80 User Guide