User's Guide

to BT Profile 1 by, on a default key layout, pressing Magic + Del. If you want to switch to the
USB-connected device, on a default key layout, you can do so by pressing Magic + left-Alt
Pairing with a BLE device
NOTE: Before you pair with a BLE host, if you had previously paired the Glove80 with the said
BLE host, you must first remove the pairing from both the BLE host and Glove80. Otherwise the
pairing attempt will fail, or will cause strange problems. Please see the section on Unpairing a
BLE device.
Pairing procedure:
1. Power on Glove80
2. Select a BT Profile on Glove80 that is currently not paired with a BLE device.
3. Press the Magic key, the selected BT Profile should be indicated in red, confirming that it
is not already in use. See the section on BT and USB indicators for further details.
4. On the BLE device you intend to pair with, use the procedure appropriate for your
operating system to pair with the “Glove80 Left” device.
a. On a Windows 10 computer,
i. Go to Settings -> Bluetooth and other devices
ii. Make sure that Bluetooth is enabled
iii. Click on the “Add Bluetooth or other device” button
iv. Choose the “Glove80 Left” device to pair with
NOTE: If the “Glove80 Left” device is not listed on the BLE device you
intend to pair with, it is possible it was previously paired with Glove80.
Therefore the pairing needs to be removed from the BLE device.
NOTE: If pairing fails or if there are strange problems, there are a number of possible
explanations:
Pae 15 Glove80 User Guide