User's Guide

2. Press the key(s) to clear all bluetooth pairings for all 5 BT Profiles. On the factory default
key layout, the keys are Magic + F10.
3. On all BLE devices that were previously paired, use the procedure appropriate to the
operating system to remove the pairing, e.g.:
a. On a Windows 10 computer,
i. Go to Settings -> Bluetooth and other devices
ii. Select the paired “Glove80 Left” device
iii. Click on the “Remove Device” button
ZMK output fallback mechanism
If Glove80 is simultaneously connected to both a USB device and an active BLE device on a
selected BT Profile, and the currently selected output is disconnected, Glove80 will
automatically fall back to output to the other connection method.
For example, if Glove80 was set to output to USB and the USB device is disconnected, the
Glove80 firmware (ZMK) will automatically fall back to output to the last selected BT Profile.
Conversely, if Glove80 was set to output to a BT Profile, and the BLE device disconnected, the
Glove80 firmware (ZMK) will automatically fall back to output to USB.
This is a ZMK behavior meant to simplify switching between devices.
In the case of automatic output fallback, if the removed connection is restored, Glove80 will
return to output to the originally selected connection method.
As described in the section BT and USB indicators, when indicators are active, Glove80 will
always highlight the current actual output, even in the case that it was activated by automatic
output fallback. If output fallback is currently active, Glove80 will display this with a red light on
LH C1R5.
For more information on this output fallback behavior, please refer to the ZMK documentation
https://zmk.dev/docs/behaviors/outputs.
Pae 17 Glove80 User Guide