User's Guide

3. If successful, the bootloader will present a USB Mass Storage Device. As an example,
on Windows you will see a File Explorer window with the name GLV80LHBOOT
4. Copy the .UF2 file into this Mass Storage Device. If successful the Mass Storage Device
will disappear.
5. Next plug in the USB-A to USB-C cable to the right half of your Glove80.
6. Put the right half into bootloader mode. On the default key layout, this is done by
pressing the keys Magic + ‘. If you have changed this in your layout, please see the
section on Putting Glove80 into Bootloader for Firmware Loading.
7. If successful, the bootloader will present a USB Mass Storage Device. As an example,
on Windows you will see a File Explorer window with the name GLV80RHBOOT
Pae 21 Glove80 User Guide