User Manual

Before using your Wi-Fi thermostat for the first me,you must
configure the Wi-Fi signal and sengs through your smartphone
or tablet ,This will allow communicaon between your
connecteddevices
ABOUT WIFI
WI-FI CONNECTION
Step 1 Downlosd your APP
（Fig1-1）
Fig 1-1 Fig 1-2 IOS Fig 1-3 Android
Search for "Smartlife" in Apple Store or Google Play or use a
browser to scan the QR code above (Figure 1-2), and complete
account registraon and installaon according to the guidance
of the APP.
Step 2. Connect the thermostat
Check the tutorial below to
Fig2.1
Fig2.2
Scan this QR code
Fig2.3
Network distribution mode:
1、 EZ Mode
When the thermostat is off, press
and hold the " "unl the
thermostat screen flashes quickly
and displays the " " icon,
and then operate according to the
following figure (Fig 2.4-Fig 2.7).
Fig2.4
Fig2.5
Fig2.6
Fig2.7
2、AP Mode
When the thermostat is off, press and hold the " " unl the
thermostat screen flashes slowly and the " " icon is displayed
(if the " " icon appears, connue to press the " " unl the
thermostat screen Flashes slowly and displays the “ ” icon),
and then operate according to the following figure (Fig 2.8-Fig 2.14).
Fig2.8 Fig2.9
Fig2.10 Fig2.11
Fig2.12
Fig2.13
Fig2.14
Aer connecng to this hotspot,
return to the "smartlife" APP
APP operation interface description
(heating thermostat)）
More settings
Thermostat
name
More
Energy saving
Buon lock
Target temp.
External sensor
temp.
Power
Room
temp.
Adjust
temp.
Programmable
mode
Manual
mode
Modify the name
of the thermostat
View the virtual ID
of the thermostat
Connect smart voice
audio guide
Share the thermostat
with your family
Group mulple
thermostats for
management
Fig2.3.1
Method 1: Scan the QR code to configure the network guide
(Fig 2.1-Fig 2.3)
Method 2: Ordinary distribuon
network guidance
(Fig. 2. 1&Fig. 2.3.1)
SIMPLE EXCEPTION HANDLING
SERVICE
Your thermostat carries an 24 months warranty
from date of purchase. Service outwith the warranty
period mayincur a charge. More detail please contact
with us directly.
No.
Phenomenons Handling
1
2
3
Power is on but without display.
Without output but display works.
Room Temp. Is a lle different from
the actual.
*Check if the terminals between LCD panel and
Power Unit Box is loosen.
* Usea new LC panel or new Power Unit Box to
replace the old one.
* Do temperature calibraon in item 1 of high
senior opons