Specifications

Transporting
TX,40,JC1101 –19–18MAR96–2/4
T100701 –UN–22MAR96
644G Show
2. Manually release park brake: Remove (3) screws and
remove sheet metal cover from brake. Loosen lock nut
(A).
3. Back out adjustment screw (B) to release park brake.
4. Remove blocks. Slowly tow machine.
Ö
CAUTION: Prevent possible injury from
unexpected machine movement. Always apply
park brake to hold machine if drive shafts are
connected.
5. When towing is completed, adjust park brake to hold
machine. (See Adjust Park Brake in Maintenance—
Every 1000 Hours chapter.)
6. Install sheet metal cover. Tighten cover screws.
Ö
CAUTION: Machine may roll when drive shafts
are disconnected. Use blocks at front and rear
of tires to prevent machine from rolling.
7. Put blocks at front and rear of tires.
TX,40,JC1101 –19–18MAR96–3/4
T6518BM6 –UN–20OCT88
8. Remove front (B) and rear (C) drive shafts so
transmission output shaft does not turn.
9. Remove blocks. Slowly tow machine.
Steps for towing machine less than 460 m (500 yd):
40–5
PN=89