Specifications

Periodic Maintenance
TX,50,DH2194 –19–29NOV94–1/2
PREPARE MACHINE FOR MAINTENANCE
Before performing maintenance procedures given in the
following chapters, and before leaving the operator’s
seat, park the machine as described below unless
another position is specified in the procedure.
1. Park machine on a level surface.
2. Lower bucket to ground.
TX,50,DH2194 –19–29NOV94–2/2
T7747BR –UN–19MAY92T8375AM –UN–02DEC94
NOTE: Boom down switch (C) must be pushed while
moving control lever forward to lower boom with
engine stopped.
3. Move transmission control lever (A) to neutral "N".
Engage neutral lock (B).
Ö
CAUTION: Prevent possible injury from
unexpected machine movement. Never rely on
transmission control lever alone to keep
machine from moving. Machine can
unexpectedly roll or move under power,
resulting in death or serious injury. Always
engage park brake to hold machine.
4. Engage park brake.
5. Turn key switch to STOP. If maintenance must be
performed with engine running, do not leave machine
unattended.
6. Turn battery disconnect switch OFF, if equipped.
50–2
PN=100