Specifications

Maintenance—As Required
TX,55,FF2820 –19–25OCT94–1/2
CHECK TIRE PRESSURE
TS211 –UN–23AUG88T87502 –UN–21OCT88
Ö
CAUTION: Explosive separation of a tire and
rim parts can cause serious injury or death.
Always maintain the correct tire pressure. DO
NOT inflate tires above the recommended
pressure.
Inspect tires and wheels daily. DO NOT operate
with low pressure, cuts, bubbles, damaged
rims, or missing lug bolts.
Carefully inspect any tire and rim assembly that
has been run flat or severely underinflated
before reinflating the tire. Damage to the rim
and tire may have developed. Call your
authorized dealer or a qualified repair service
to inspect the rim and tire assembly and make
necessary repairs.
When inflating tires, use a clip-on chuck and
extension hose long enough to allow you to
stand to one side and NOT in front of or over
the tire assembly. Use a safety cage if
available.
NEVER cut or weld on an inflated tire or rim
assembly. Heat from welding could cause an
increase in pressure and may result in tire
explosion.
Do not attempt to mount a tire if you do not
have the proper equipment and experience to
perform the job. Have it done by your
authorized dealer or a qualified repair service.
Check tire pressure with an accurate gauge having 7.0
kPa (0.07 bar) (1 psi) graduations.
1. Shut off air supply to hose.
2. Move gauge hand to correct pressure.
3. Lock air chuck on tire valve.
55–1
PN=108