Specifications

Maintenance—As Required

03T,55,MM11 –19–18NOV92–1/1

CLEAN DUSTY PRIMARY ELEMENT

T47764 –UN–09NOV88

1. Tap element with the palm of your hand, NOT ON A

HARD SURFACE.

CAUTION: Prevent possible injury from flying

chips if compressed air is more than 210 kPa

(2.1 bar) (30 psi). Reduce compressed air to

less than 210 kPa (2.1 bar) (30 psi) when using

for cleaning purposes. Clear area of

bystanders, guard against flying chips, and

wear personal protection equipment including

eye protection.

2. If this does not remove dust, use compressed air under

210 kPa (2.1 bar) (30 psi).

3. Direct air up and down the pleats from inside to

outside. Be careful not to make a break in the element.

03T,55,C19 –19–24JUL91–1/1

CLEAN OILY OR SOOTY PRIMARY ELEMENT

T90673 –UN–10NOV88

IMPORTANT: You can damage element. DO NOT

wash element in fuel oil, oil, gasoline,

or solvent. DO NOT use compressed air

to remove water from an element.

1. Wash element in warm water and John Deere R36757

Filter Element Cleaner or equivalent non-sudsing

detergent.

2. Flush with clean water. Use water pressure under 280

kPa (2.8 bar) (40 psi).

3. Shake the element to remove water. Do not install

element unless it is dry.

55–7

PN=114