Specifications

Maintenance—As Required
TX,55,DH2206 –19–31JUL92–1/1
CHECK AIR INLET COVER
T6779BQ –UN–19OCT88
1. Loosen clamp and slide strap (B) down stack.
2. Remove air inlet cover (A).
Ö
CAUTION: Prevent possible injury from flying
chips if compressed air is more than 210 kPa
(2.1 bar) (30 psi). Reduce compressed air to
less than 210 kPa (2.1 bar) (30 psi) when using
for cleaning purposes. Clear area of
bystanders, guard against flying chips, and
wear personal protection equipment including
eye protection.
3. Clean cover with compressed air or soapy water. Dry
cover.
4. Install cover on stack. Tighten clamp.
55–9
PN=116