Specifications

Maintenance—As Required
TX,55,JC1118 –19–20MAR96–1/1
INSPECT SERPENTINE BELT—644G
T7405BG –UN–15NOV90
1. Check belt regularly for wear, especially for cracks at
the bottom of grooves and for frayed edges.
2. If necessary, replace belt.
3. Place the drive of a 1/2 in. drive ratchet in square
hole. Turn ratchet counterclockwise to pull tension
adjuster assembly away from belt, releasing belt
tension.
4. Hold tension adjuster assembly away from belt while
removing old belt and installing new belt.
5. Slowly turn ratchet clockwise to place tension adjuster
assembly against new belt. Tension is automatically
adjusted.
6. Remove ratchet from assembly.
TX,55,DH2491 –19–16MAY95–1/2
DRAIN FUEL TANK
1. Remove fuel tank filler cap.
TX,55,DH2491 –19–16MAY95–2/2
T7773CN –UN–21AUG92
NOTE: Petcock located at left front of machine frame
bottom guard.
2. Loosen petcock (A).
3. Drain water and sediment into a container.
4. Tighten petcock.
5. Install filler cap.
55–11
PN=118