Specifications

Maintenance—As Required
TX,55,JC283 –19–16MAY95–3/3
T8387AD –UN–17DEC94
5. Remove fuel inlet line (A) and fuel drain plug (C).
6. Flush any debris from filter base (B).
7. Install fuel inlet drain plug and fuel inlet line.
8. Assemble primer assembly and install onto fuel filter
base.
9. Install filter element to fuel filter base.
10. Close side shield.
11. Dispose of waste properly.
TX,55,JC1105 –19–18MAR96–1/1
DRAIN AND CLEAN PRIMARY FUEL FILTER
(WATER SEPARATOR)—644G
T100696 –UN–22MAR96
A—Final Fuel Filter
B—Bleed Screw
C—Bleed Screw
D—Pump
E—Fuel Supply Line
F—Primary Fuel Filter
G—Drain Valve
1. Open left side shield to access primary fuel filter (F).
2. Place container under filter.
3. Open drain valve (G) and press pump (D) to extract
water from fuel system.
4. Close drain valve.
55–13
PN=120