Specifications

Maintenance—Every 10 Hours or Daily
TX,60,JC1106 –19–18MAR96–2/2
T7829AE –UN–31AUG92
544G Shown
T7829AF –UN–31AUG92
624G Shown
T100695 –UN–22MAR96
644G Shown
3. 544G, 624G: Make sure dipstick (A) is fully seated.
4. 544G, 624G: Remove dipstick to check oil level.
644G: Tighten filler cap (B) to fully seat. Remove filler
cap to check oil level.
BEFORE THE ENGINE IS STARTED: The engine is
full when oil level is in the cross hatched area. It is
acceptable to run the engine when the oil level is
above the ADD mark.
AFTER THE ENGINE HAS BEEN RUN: Allow the oil
to drain into the oil pan for 10 minutes before
checking the oil level. Ten minutes after shutdown the
engine oil level must be above the ADD mark.
5. If necessary, remove filler cap (B) to add oil. (See
Fuels and Lubricants chapter.)
60–2
PN=123